You send the same magnet enquiry to five suppliers. One replies immediately but asks for information already in your drawing. Another sends a low price with almost no detail. A third asks two precise questions and explains when it can quote. Which one deserves your time?
For a buyer, the purpose of a magnet RFQ is to get an offer you can use: a price for the right part, a credible production schedule, and enough clarity to decide whether the supplier is worth qualifying.
A clear enquiry helps a busy sales team understand the opportunity and get the right people involved. It also protects your position when you compare offers and negotiate. You can make the project easy to evaluate without disclosing your entire purchasing strategy.
Give the supplier a reason to work on your enquiry
“Please quote your best price” tells a salesperson very little about the decision you need to make. A short explanation of the project is more useful: you are qualifying a second source, replacing an inconsistent supplier, or developing a new part that needs samples before release.
Explain the stage, the next decision, and the timing. For example: “We are qualifying an alternative source for an existing part. The first order is 30,000 pieces. We will approve samples before releasing production. Please confirm feasibility this week.” This is an illustrative enquiry, not a BMAG order record.
You do not need to name your current supplier or customer. You do need to show what happens if the quotation is suitable. That gives the supplier a practical reason to invest engineering and estimating time.
A small first order needs context, not an inflated forecast
A small batch may be a trial for a recurring requirement—or it may be the whole project. Say which. Separate the quantity you can buy now from demand that is still a forecast.
If expected annual demand is useful context, give it with its conditions: “Estimated annual usage is 3,000,000 pieces, subject to sample approval and customer demand. Please quote the initial 30,000-piece order separately.” Do not imply that the forecast is a purchasing commitment.
You can also ask for prices at two or three realistic quantities. If the larger quantity needs to be ordered or delivered together to qualify for that price, find out early. A price based on one large production batch is not automatically available for monthly releases.
If this is a one-off order, being clear can save time too. Ask whether it fits the supplier’s process and minimum batch requirements before starting a long price discussion.

Make the first reply easy to give
An RFQ can stall when it asks for a firm quotation, a design recommendation, a full audit questionnaire, and a sample commitment at the same time.
Start with the decision you need next. Ask the supplier to confirm whether it can make the part, identify any missing information, and state when it can provide a quotation. Keep the drawing number and revision visible in the email.
If a requirement is open, explain what is open and what is fixed. “Grade to be reviewed; outer dimensions and maximum operating temperature are fixed” is more actionable than “please recommend a suitable magnet.” If a preliminary estimate is sufficient, say so—and ask the supplier to list its assumptions.
This also gives you a useful first check. Does the supplier read the enquiry, identify the real uncertainty, and agree a next step?

Decide what the supplier can change before you ask for a lower price
A lower quotation may come from a better manufacturing route. It may also come from a different grade, wider tolerance, alternative coating, reduced inspection, or a larger batch. You need to know which.
Request a quotation against the specified drawing first. Invite cost-saving alternatives as a separate option, with every deviation identified. That lets you compare the specified part consistently while still benefiting from the supplier’s process knowledge.
It helps to distinguish requirements that affect function from details that are negotiable. An engineer may be willing to review a noncritical dimension or delivery split, while the magnetic requirement and assembly fit remain fixed. The purchasing team should agree those boundaries internally before accepting an alternative.
Do not accept a cheaper offer against an old drawing revision and assume that the difference will be resolved after ordering.
Should you disclose a target price?
There is no single rule. A target can help when you need to find out whether a design is commercially feasible. It can also anchor the discussion before you understand the supplier’s independent price.
If you have a firm budget limit, state the scope behind it: quantity, specification, delivery basis, and which costs it covers. Ask whether the limit can be met without changing the agreed requirements. If a change is needed, request a clearly identified alternative.
If you are still establishing the market, you can first ask for the supplier’s quotation and quantity breaks. You do not need to send a competitor’s complete offer or reveal your maximum budget. Compare equivalent scopes, then negotiate the points that make a measurable difference.
For BMAG, the main price drivers are raw-material cost, specification and grade, and quantity. Processing difficulty and coating also affect the price. Those are useful areas to discuss when evaluating a cost-saving proposal.
Check what is behind the price before comparing suppliers
A useful quotation should make its basis clear. Look for the drawing revision, quantity, agreed requirements, delivery terms, included inspection, and any exceptions. When one offer is much lower, ask what assumptions produced it before treating it as a saving.
In BMAG’s quoted scope, packaging, tax and inspection costs are included; freight and insurance are listed separately. The quotation still needs to specify the applicable tax scope and delivery terms. Destination import charges should be confirmed explicitly.
BMAG quotations are generally valid for seven days, with validity depending on raw-material price movements. Check the actual quotation when your approval process takes longer, or when you change the quantity or drawing.
You may also need to ask whether a sample price, tooling or fixture cost, special test, or special packaging requirement affects your order. Have the supplier identify any exception in writing before you compare totals.
Turn “urgent” into dates the supplier can assess
Tell the supplier whether your deadline is sample receipt, production completion, dispatch, or arrival at your site. If you can accept a partial shipment, say so. A real required date and a flexible delivery option are more useful than repeatedly asking for the fastest lead time.
For BMAG regular orders, production usually takes approximately 15–30 calendar days, counted after receipt of the deposit and confirmation of the drawing and specifications. The endpoint is production completion. Dispatch and transport time require separate confirmation.
Ask what must happen before the proposed schedule can start. If sample approval or an unresolved specification is still outstanding, a production lead time alone does not tell you when the parts will arrive.
Use the quotation process to assess the working relationship
A prompt acknowledgement is helpful. More revealing is whether the supplier notices a missing dimension, flags an unconfirmed requirement, and explains how it affects the offer.
Watch how revisions are handled. If you change the coating or tolerance, does the next quotation show the correct revision and explain any price or schedule change? If a question needs an engineer, does the salesperson arrange that discussion and return with a clear answer?
For a critical part, ask what sample checks or documents are available for the requirement that matters to you. A photograph of a machine can support a capability discussion; the relevant method and report help you judge how your part would be verified.
You are already observing part of the future supply relationship. Repeatedly correcting basic misunderstandings before ordering is information worth considering alongside price.

A short RFQ you can copy
Attach the drawing instead of repeating every dimension in the email. Use the message to explain the purchasing context and the response you need.
Subject: RFQ — [part number / revision] — [first-order quantity] We are [qualifying a second source / developing a new part / sourcing a repeat requirement]. Drawing and specification: [attachment and revision] First-order quantity: [quantity] Sample requirement: [quantity and purpose] Expected repeat demand: [forecast, if relevant; not a commitment] Required date: [state sample receipt, production completion, or arrival] Delivery destination: [country, city, postal code] Fixed requirements: [critical dimensions and tolerances, material and full grade, magnetization direction / pole pattern, coating / finish, magnetic performance and test conditions] Open questions: [items needing supplier review] Please confirm feasibility and any missing information by [date], and let us know when you can provide the quotation. Please list assumptions or deviations separately. Quote the specified part first; show cost-saving alternatives separately.
Before sending, check that the attachment identifies the material and full grade, dimensions and tolerances, coating, magnetization direction, operating conditions, and required inspection—or clearly marks anything still to be agreed. Our magnet product range can help you identify the type of part you want to discuss.
Starting an enquiry with BMAG Magnet
Send your drawing, first-order quantity, destination, and project timing through your BMAG sales contact or the website enquiry channel. Tell us what is fixed and where you want input.
If you are qualifying an alternative supplier, make that clear. If your design is still open, identify the decision you need help making. Those details give us a clearer basis for discussing the specification, preparing an offer, and agreeing the next step with you.



